AiM GSX-R 1000 - Manual (Page 17)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com
2 0
2.8 – Installing the TPS cable
Warning: before installing the cable it is necessary to remove the fuel tank, as
recommended in the previous pages.
Unplug the Suzuki stock cable form TPS sensor and connect it to MXL wiring male
connector labelled as TPS (as shown in the image above).
Connect female connector of MXL TPS cable to the TPS sensor (as shown by the blue
arrow).
Connect the 4 pins male plastic Binder connector to one of the free channels depending
on MXL model (See chapter “Channels”).
To configure the channel the TPS sensor is installed on, refer to the related chapter in the
following pages.
17