AiM GSX-R 1000 - Manual (Page 14)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com
Water temperature stock connector,
Figure 19, is a 2 pins green connector
placed on the left part of the bike (see
Figure 17).
Here below is the water temperature
connector.
NOTE: cable colours corresponds to real
ones.
Figure 19 : water temperature connector – particular
3 pins male/female connector are inserted
one in the other.
To unplug male connector from female one
use a flat screwdriver: push down the
locking tongue and unplug the connectors.
Attention: pull the connectors and not the
cables (they me be seriously damaged)
and unplug each cable from the connector.
Figure 20: how to unplug a connector.
Green connector
To the ECU
1 5
2.5 – Assembling the kit.
The 5
th
installation step is assembling the
kit for Suzuki GSX-R.
It has four anti-vibration mountings already
fixed on the back of MXL;
Install MXL on the aluminium bracket: the
bracket needs to be fixed to MXL in
correspondence of the 4 anti-vibration
mountings and with 4 screws and 4
Grover washers.
Figure 21: anti-vibration mounting – particular
Figure 22 shows the correct assembling
of MXL, bracket and washers (rear view).
Figure 22: MXL and bracket – rear view
14