4 back panel, Anel – AirLive ARM-204 v2 User Manual
Page 11
Four-Port ADSL Router Front Panel (ARM-204 v2)
Descriptions of LED status
PWR
When an active power adapter is connected with router, this LED will light up.
USB
When an active USB cable is connected with router, this LED will light up.
LAN4
When port 4 connection with PC or Switch / Hub is established, this LED will light up.
LAN3
When port 3 connection with PC or Switch / Hub is established, this LED will light up.
LAN2
When port 2 connection with PC or Switch / Hub is established, this LED will light up.
LAN1
When port 1 connection with PC or Switch / Hub is established, this LED will light up.
ADSL
When connection with Internet (ADSL Connected) is established, this LED will light up.
When this LED is flashing: NO ADSL physical connection
2.4 Back Panel
One-Port ADSL Router Back Panel (ARM-201)
Descriptions of All Connectors
LINE
Connect with phone cable
USB
Connect with USB cable to PC
DEFAULT Reset button.
LAN
Connect with Ethernet Cable to Switch Hub or PC
PWR
Connect with power adapter
ON/OFF Power switch button
8
AirLive ARM-204 v2 User’s Manual