AirLive ARM-204 v2 - Manual (Page 62)

Destination IP Address: Enter the destination IP address that you wish to deny access to your system.
Subnet Mask: Enter the subnet mask of the destination IP address
Port Number: Enter the port number of the destination IP address. Note that 0 means that all ports are
allowed
Protocol: Select the protocol to filter. Choices are TCP, UDP, and ICMP.
Rule Unmatched: Choices are Forward and Next. Select what happens to the data in question if the rule
you are currently editing is unmatched. Next means that the data is then compared to the next IP filter rule.
Forward means that the data will be allowed into your system. Note that a Forward rule should be the last rule,
as no data will be compared to rules after a Forward rule.
IP/MAC Filter Set Index: Select the IP/MAC filter set you wish to view.
For Example
59
AirLive ARM-204 v2 User’s Manual