AirLive ARM-204 v2 - Manual (Page 61)

Filter Type: You can select IP/MAC Filter, Application, and URL Filter type.
IP/MAC Filter Set Index: The IP/MAC Filter Set Index from 1 to 12 and each index can set up to 6 IP Filter.
Interface: Choices from PVC0 to PVC7 and LAN.
Direction: Choices are Both, Incoming and Outgoing. Select which direction of data flow you wish to apply
the filters to. Note that Incoming and Outgoing are from the point of view of your router, relative to the
interface you select. For WAN, data coming from outside your system is considered Incoming and data
leaving your system is Outgoing. For LAN, data leaving your system is considered Incoming and data
entering your system is Outgoing.
IP/MAC Filter rule Index: The IP/MAC Filter rule Index from 1 to 6.
IP/MAC Filter Rule Editing: Select the IP/MAC Filter Rule Index you wish to modify.
Active: Toggle this rule index on or off with Yes or No, respectively.
Source IP Address: Enter the source IP address you wish to deny access to your system.
Subnet Mask: Enter the subnet mask of the source IP address.
Port Number: Enter the port number of the source IP address. Note that 0 means all that ports are allowed.
58
AirLive ARM-204 v2 User’s Manual