3 configure tcp/ip, Onfigure, Tcp/ip – AirLive ARM-204 v2 User Manual
Page 22
Advertising
3.3 Configure TCP/IP
For Windows 98SE and ME
Step 1:
Click Start then Settings and choose Control Panel
Step 2:
Double click Network icon.
Step 3:
Select Configuration tab, then choose TCP/IP from the list of installed network
Components and click Properties button.
Step 4:
You can setup the following configurations in two methods:
Option1: Get an IP from Router Automatically
Select the IP Address tab.
In this page, click Obtain an IP address automatically radio button.
19
AirLive ARM-204 v2 User’s Manual
Advertising