AirLive ARM-204 v2 - Manual (Page 46)

4.3 Interface Setup
Click an Interface Setup link to set ATM VC values, ISP Encapsulation, configure multi- connection
settings, and LAN configuration.
4.3.1 Internet
[ATM VC]
ATM settings are used to connect to your ISP. Your ISP provides VPI, VCI, settings to you. In this Device, you
can totally setup 8 PVCs on different encapsulations if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QOS to setup each PVC
traffic line’s priority.
Virtual Circuit: Select the VC number you want to setup.
VPI: Virtual Path Identifier. The valid range for the VPI is 0 to 255.
VCI: Virtual Channel Identifier. The valid range for the VCI is 1 to 65635 (0 to 31 is reserved for local
management of ATM traffic).
ATM QoS: Select the Quality of Service types for this Virtual Circuit. The ATM QoS types include
CBR(Constant Bit Rate), VBR(Variable Bit Rate) and UBR (Unspecified Bit Rate). These QoS types are all
controlled by the parameters specified below, including PCR, SCR, and MBS.
43
AirLive ARM-204 v2 User’s Manual