AirLive ARM-204 v2 - Manual (Page 55)

[Virtual Server]
The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server,
that you can make visible to the outside world even though NAT makes your whole inside network appear as a
single machine to the outside world.
Rule Index: The Virtual server rule index for this VC. You can specify up to 10 rules. All the VCs with single
IP will use the same Virtual Server rules.
Start & End port number: Enter the specific Start and End Port number you want to forward. If it is one port
only, you can enter the End port number the same as Start port number. For example, set the FTP Virtual
server, you can set the start and end port number to 21.
Local IP Address: Enter the IP Address for the Virtual Server in LAN side.
52
AirLive ARM-204 v2 User’s Manual