AirLive IAS-2000 v2 - Manual (Page 150)

IAS-2000 v2
User’s Manual
. 143
Appendix B. Console Interface Configuration
Via this port to enter the console interface for the administrator to handle the problems and situations occurred
during operation.
1. To connect the console port of IAS-2000 v2, a console,
modem cable and a terminal simulation program, such
as the Hyper Terminal are required.
2. Please set the parameters as 9600,8,n,1 for Hyper
Terminal.
Caution: the main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of IAS-2000 v2 is connected properly, the console main screen will appear automatically.
If the screen does not appear in the terminal simulation program automatically, please try to press the arrow
keys, so that the terminal simulation program will send some messages, and the welcome screen or the main
menu will appear. If the welcome screen or the main menu of the console still does not appear, please check the
connection of the cables and the settings of the terminal simulation program.