AirLive IAS-2000 v2 User Manual
Page 20
IAS-2000 v2
User’s Manual
.
13
3. Select “General” label and choose “Internet Protocol
(TCP/IP)” and then click Properties. Now, choose to
use DHCP or specific IP address.
4-1. Using DHCP: If using DHCP is desired, please choose
“Obtain an IP address automatically” and click OK.
This is also the default setting of Windows. Then,
reboot the PC to make sure an IP address is obtained
from IAS-2000 v2.
4-2. Using Specific IP Address: If using specific IP
address is desired, ask the network administrator for
the information of the IAS-2000 v2: IP address,
Subnet Mask, New gateway and DNS server
address.
Caution: If your PC has been set up completed, please inform the network administrator before modifying the
following setup.