AirLive IAS-2000 v2 - Manual (Page 40)

IAS-2000 v2
User’s Manual
. 33
5.1.4 WAN2 & Failover
There are 3 methods of obtaining an IP address for the WAN2 Port: None, Static IP Address, and Dynamic IP
Address.
y
None: The WAN2 Port is not functional.
¾ Warning of Internet Disconnection: Enable to detect the WAN1 port connection status.
y
Static IP Address: Specify the IP Address, Subnet Mask, Default Gateway of WAN2 Port and Preferred DNS
Server, which should be applicable for the network environment. Up to three URLs can be entered. Check
“Warning of Internet Disconnection” to work with the WAN Failover function.
¾ WAN Failover: When WAN1 connection fails, the traffic will be routed to WAN2 automatically.
¾ Fallback to WAN1 when possible: When WAN1 connection is recovered, the routed traffic will be back to
WAN1.