AirLive IAS-2000 v2 - Manual (Page 55)

IAS-2000 v2
User’s Manual
. 48
‹ Reserved IP Address List: If you want to use the reserved IP address function, click on the
Reserved IP Address List on the management interface. Then, the setup of the Reserved IP
Address List as shown in the following figure will appear. Enter the related Reserved IP Address,
MAC, and Description (not compulsory). When finished, click Apply to complete the setup.
¾ Enable DHCP Relay: If you want to enable this function, you must specify a DHCP Server IP address. See
the following figure.