AirLive MU-7000AVs - Manual (Page 20)

6. Network Hard Disk (AirLive NDAS Mode)
7. If this is your first time installing LAN Share, Add New Hardware Wizard will appear. Click Next
and follow further instructions. Otherwise, MU-7000AV will be listed as a local drive on My Computer.
Driver letter and name may vary between Personal Computers.
8. Select Search for the best driver for your device. Click Next.
9. Select Specify a location and click Browse button. From the Browse for Folder window, search for
NDASUSB folder and click OK. Once the location is set, click Next from the Add New Hardware
Wizard window.
10. Click Next.
11. Driver has been successfully installed, click Finished.
6.1.3 NDAS Administrator
When software installation is completed, you will find a NDAS Launcher Icon on your desktop screen and
a NDAS Administrator Tool icon on the system tray.
1. NDAS Launcher (desktop icon) activates and loads the NDAS Administrator Tool onto the system tray.
2. NDAS Administrator Tool (system tray icon) performs the following functions：
- Refresh NDAS Status - Enable Read Only Access
- Add a NDAS - Disable a NDAS
- Display Software Version - Edit NDAS Name
- Enable Read / Write Access - Display NDAS Properties
6.1.4 Add / Register a New NDAS Device using the Registration Wizard
1. Click on the NDAS Device Management Icon located on the system tray.
2. Select Register A New Device.
3. NDAS Device Registration Wizard will appear. Click Next to continue.
4. Enter a name for the NDAS Device and click Next.
5. Add your NDAS Device ID and Write Key. Write Key is needed to write to NDAS Device. Click
Next to continue.
- If the Write Key was entered in the previous step, the NDAS is registered as Read / Write Mode.
- If the Write Key was not entered in the previous step, the NDAS is registered as Read Only Mode.
Note: NDAS Device ID and Write Key do not contain the letter O. Please use the number 0 for all
letter 0’s.
14
AirLive Mu-7000AV User’s Manual