AirLive MU-7000AVs - Manual (Page 21)

6. Network Hard Disk (AirLive NDAS Mode)
6. Checking NDAS Device status.
7. Select how you want to mount the NDAS Device
Read/Write Mode: Mounts NDAS Device as Read/Write Mode.
Read-Only Mode: Mounts NDAS Device as Read-Only Mode.
Don’t Mount: NDAS Device is left in Connected (Unmounted) Mode.
Note: Read/Write Mode will be disabled if a user did not enter the Write Key during step 5.
8. Registration is finished. Click Finish
6.1.5 Add / Register a New NDAS Device without using the Registration Wizard
1. Click on the NDAS Device Management icon located on the system tray.
2. Select Register A New Device.
3. The Register a new NDAS Device window will appear.
4. Enter in a NDAS Device Name.
5. Type in NDAS Device ID and Write Key. Write Key is needed to write to NDAS Device.
Leave the Activate this device after registration box checked to automatically enable the device after
registration.
Note: NDAS Device ID and Write Key do not contain the letter O. Please use the number 0 for all
letter 0’s.
6.1.6 Found New Hardware Wizard
1. After you have registered, the Found New Hardware Wizard may appear.
If the window appears, click Next to install the new NDAS Device.
It should automatically find the appropriate drivers for your NDAS Device.
Note: For Windows 2000, Upgrade Device Driver Wizard will appear instead.
15
AirLive MU-7000AV User’s Manual