AirLive MU-7000AVs - Manual (Page 31)

6. Network Hard Disk (AirLive NDAS Mode)
6.6 Other NDAS Bind Management Functions
The NDAS 3.11 Bind Management software also comes with new added features such as
- Add Mirror
- Migrate - Replace Device - Replace HDD
- Add Spare Disk - Remove Spare Disk
6.6.1 Add Mirror
Adds a mirrored disk to a basic disk by adding a empty disk to a original disk which is in use, you can build a
RAID 1 which contains data of original disk.
1. Right click on the Disk you wish to Mirror, Click Add Mirror.
2. Select the Disk to Mirror with and click OK.
6.6.2 Migrate
Migrate needs to be done with bound disks if upgrading from a older version of NDAS Device software.
Migrate makes the bind compatible with the new software. You will receive a notification if you attempt to
mount a previously binded drive without Migrate first.
6.6.3 Replace Device
Replaces the selected device in RAID with another one when one NDAS device is missing or out of order in
RAID 1, you can replace it with a new NDAS device. The disk in the new NDAS device should have enough
capacity and will be synchronized automatically.
6.6.4 Replace HDD
Replaces the HDD in the selected device with another one. When one disk in a NDAS device is missing or
out of order in RAID 1, you can replace it with a new disk.
The new disk should have enough capacity and will be synchronized automatically.
6.6.5 Add Spare Disk
You can add a NDAS device to RAID 1 as spare disk so that the NDAS device is replaced automatically
when any disk in RAID goes missing or out of order.
1. Right click on your Mirror then select Add Spare Disk.
25
AirLive MU-7000AV User’s Manual