AirLive MU-7000AVs - Manual (Page 36)

7. FAQ
sure that all computers have the same exact version of NDAS software installed.
5. Why can’t my computer go into hibernation or standby？
You must have customer select the Allow suspend/hibernation box from the Options menu in NDAS
Device Management.
6. When I try to copy something to my NDAS, why does the following show up: “Cannot copy
NDAS Administrator: The disk is write-protected. Remove the write-protection or use
another disk.”？
You do not have Read/Write access. Click on the NDAS Icon in your bottom-right system tray.
Go to your NDAS and then click on "Enable Read/Write."
7. Why can't I format my whole NDAS to FAT32？
Windows 2000/XP/Server 2003 comes with a limitation of only 32GB partitions that it can create. This is a
Windows limitation and the only resolution is to use a 3rd party partitioning software or use a
Windows 98SE/ME computer to format the entire drive to FAT32. With our Multi-Write drivers,
NTFS is recommended anyways for stability and performance purposes.
LAN Share for Windows 98SE/ME
1. How do I disconnect NDAS？
We recommend using the Disable option from your NDAS Administrator Tool if connected via
NDAS (Ethernet). You can also use the "Unplug or Eject Hardware" icon in your System Tray to stop
the LAN Share before disconnecting it (this applies to either USB or NDAS mode).
2. I have just installed NDAS, why does NDAS show up as a red color？
Try turning off your MU-7000AV power cord, wait about 10 seconds, and turn it on. If this
doesn't work, try restarting your computer as well.
LAN Share for Mac OS X
1. How do I disconnect NDAS?
To disconnect NDAS, we always recommend using the Eject option. If you CRTL+click on
the NDAS on your Desktop, then you will be given an option to Eject the NDAS. After
that, you can go into LAN Share Admin and Disable your NDAS.
If you are using USB, then Ejecting the NDAS is all that is needed.
2. How should I format NDAS？
It is recommended to format LAN Share to Mac OS Extended format. If you also have a Windows
computer as well, and would like to use it between the two, then you must format it to FAT32 for it to
be recognized on both computers. You may need a 3rd party partitioning utility to format the entire
drive to FAT32.
Aggregation & Mirroring
1. What is the maximum number of LAN Share that support aggregation？
Aggregation can currently be done using eight (8) NDAS units
USB
1. My LAN Share shows up as a Black dot when used with USB.
When used with USB mode, the software is not needed, therefore you will see a black dot (disconnected)
in the system tray as that is an indicator for NDAS (Ethernet) mode.
30
AirLive Mu-7000AV User’s Manual