AirLive MU-7000AVs - Manual (Page 32)

6. Network Hard Disk (AirLive NDAS Mode)
2. Choose the Spare Disk and click OK.
3. Spare successfully added
Note：If using a larger capacity drive to add to the mirror, the larger capacity will be matched to
the size of the existing mirrored drives.
6.6.6 Remove Spare Disk
Removes a spare disk from the fault tolerant RAID disk group.
1. Right click, select Remove Share Disk.
2. Choose the Removed Disk and click OK.
6.6.7 Using Mirrored NDAS Devices
NDAS Driver 3.11 does not support the Mirror feature that have been offered by our earlier driver versions.
However, the driver does recognize the Mirrored NDAS device and will display them on the NDAS Bind
Management
. Users can continue to use Mirrored NDAS devices as before. But users cannot modify the
Mirrored NDAS devices. If so, the Mirrored devices will break.
Upgrading the driver without breaking the Mirrored NDAS device
1. Disable all NDAS devices. (both single and bind devices)
2. Uninstall the previous driver. (reboot required)
3. Install the 3.11 driver. (reboot required)
4. You may need to register the NDAS devices again.
Note：Do not mount the NDAS Device at this time.
5. Go to NDAS Bind Management.
6. Right click one of the NDAS Devices and click on Migrate.
7. You can now mount your NDAS Device.
Using Bound NDAS device among different driver versions
If a user upgrades their driver to 3.11, we recommend everyone else sharing the NDAS devices to
upgrade their driver to 3.11 as well. Once the user with 3.11 migrates the Mirrored NDAS device’s binding
information, other users sharing the Mirrored NDAS device will no longer have access to the Mirrored
NDAS devices if they are still running older versions of NDAS Device software.
Here are some notes：
26
AirLive Mu-7000AV User’s Manual