AirLive WL-5460CAM - Manual (Page 11)

Rear Panel
( Antenna
AirLive WL-5460CAM User’s Manual 10
1
DC Power Connector
3
Network Cable Connector
2
Reset Button
1. DC Power Connector
The DC power input connector is located on the camera’s rear
panel, and is labeled DC5V 2.5A with a single jack socket to
supply power to the camera. Power will be generated when the
power supply is connected to a wall outlet.
2. Reset Button
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds; meanwhile, the Link LED lights
up or blinks. Release the reset button and the Link LED will turn
off, indicating that the camera restores the factory default settings.