AirLive WL-5460CAM - Manual (Page 91)

AirLive WL-5460CAM User’s Manual 90
Q: What network cabling is required for the camera?
A: The camera uses Category 5 UTP cable with RJ-45 connector,
which allows 10 Base-T and 100 Base networking.
Q: Can the camera be setup as a PC-cam on the computer?
A: No, the camera is an Internet Camera used only on Ethernet
and Fast Ethernet network and supported by wireless transmission.
Q: Can the camera be connected on the network if it consists of
only private IP addresses?
A: The camera can be connected to LAN with private IP
addresses.
Q: Can the camera be installed and work if a firewall exists on
the network?
A: If a firewall exists on the network, port 80 is open for ordinary
data communication. However, since the camera transmits image
data, the default ports 5000, 5001 and 5100 are also required.
Therefore, it is necessary to open ports 5000, 5001 and 5100 of
the network for remote users to access the camera.