AirLive WL-5460CAM - Manual (Page 95)

AirLive WL-5460CAM User’s Manual 94
A2: The default router setting might be a possible reason. Need
to double check if the configuration of the default router settings
is required.
Q: Why does a series of broad vertical white line appears through
out the image?
A: A likely issue is that the CMOS sensor becomes overloaded
when the light source is too bright such as direct exposure to
sunlight or halogen light. You need to reposition the camera into
a more shaded area immediately as this will damage the CMOS
sensor.
Q: There is bad focus on the camera, what should be done?
A1: The focus might not be correctly adjusted for the line of sight.
You need to adjust the camera focus manually as described in
Adjust Internet Camera Focus.
A2: There is no adaptor fitted with your C-type lens. If you have
previously changed the supplied CS-type lens, you may have
unintentionally installed a C-type lens without fitting the adaptor
first.
Q: Noisy images occur how can I solve the problem?
A1: The video images might be noisy if the camera is used is a
very low light environment. To solve this issue you need more
lighting.
A2: There might be wireless transmission interference make sure
there are no other wireless devices on the network that will affect
the wireless transmission.