AirLive WL-5460CAM - Manual (Page 43)

Port
Click the Port item of the Tools submenu to bring up the
following page, which allows you to setup the ports used to
transmit the camera’s data.
- Enable UPnP Control Point: Setup the Web port to
transmit the camera’s image data. The default setting is
port 80.
- Non UPnP: When you select this option, you can set up
the following items manually.
• Web Port: Setup the Web port to transmit the
camera’s image data. The default setting is port 80.
• AV Control Port: Setup the transmission of streaming
data within the network. The default setting is port
5000.
• AV Streaming Port: The default setting is port 5001.
• IP View Lite Port: The default setting is port 5100.
AirLive WL-5460CAM User’s Manual 42