Network cable connector, Antenna – AirLive WL-5460CAM User Manual
Page 12
Advertising
AirLive WL-5460CAM User’s Manual
11
When factory reset is completed, the configuration of camera will
return to the defaults as:
-
IP address: 192.168.1.2
-
Administrator’s login name: admin
-
Password: admin
-
Wireless status (for wireless model): disabled
3. Network Cable Connector
The camera’s rear panel features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling (which should be Category 5 twisted-pair cable).
The port supports the N-Way protocol and “AutoMDIX” function,
allowing the camera to automatically detect or negotiate the
transmission speed of the network.
4. Antenna
The rotatable external antenna allows you to adjust its position to
obtain the maximum signal.
Advertising