Aladdin Light Lift ALL300-CM - Manual (Page 4)

STEP 5
Attach the 1/2” conduit connector on ceiling box to bottom of conduit assembly. Once completely inserted,
tighten set screw on conduit connector. See Diagram B.
Never attach or adjust the conduit assembly improperly. This could interfere with the automatic shutoff
system and could cause the chandelier to fall, which could cause death, personal injury, and/or property
damage.
1/2” Conduit Connector
STEP 6
Tighten temporary five pound weight to fixure coupler on bottom contact plate. Make sure jam nut on
weight is tight.
Never install or operate an ALL300 before securing the temporary five pound weight to the fixture
coupler. This could cause the temporary weight to fall, which could cause death, personal injury, and/or
property damage.
Diagram B