Allworx System 7_5 - Manual (Page 11)

User’s Guide – Release 7.5
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2013 Allworx Corp, a Windstream company. All rights reserved. All other names may be trademarks or registered trademarks of their respective
owners.
Revised: April 19, 2013
Page 8
6. Press 4: To prevent callers from leaving messages
To configure Announce Only Call Handling in My Allworx Manager
1. If you have not already done so, record a greeting for the Presence that will be used for Announce
Only. Do this using the procedure in Section 1.4.3, Manage Greetings. After you have completed
recording and saving the greeting, hang up.
2. Open and log into My Allworx Manager using your PIN. See Section 2, My Allworx Manager, for
instructions.
3. Choose the My Presence tab.
4. Check the box or boxes for the presence(s) for which you do not want to record messages. The
boxes will only be enabled for the presences for which you have already recorded greetings, as
instructed in Step 1.