ArcOne Clean Air Flow - Manual (Page 8)

Cautions and Limitations (refer to the enclosed Approval Labels)
• Not for use in atmospheres containing less that 19.5 percent oxygen.
• Not for use in atmospheres immediately dangerous to life or health.
• Do not exceed maximum use concentrations established by regulatory
standards.
• Do not use powered air-purifying respirators if airfl ow is less than six cfm
(170 lpm).
• Follow established cartridge and canister change schedules or observe
ESLI to ensure that cartridges and canisters are replaced before break-
through occurs.
• Contains electrical parts which have not been evaluated as an ignition
source in fl ammable or explosive atmospheres by MSHA / NIOSH.
• Failure to properly use and maintain this product could result in injury or
death.
• Follow the User’s Instructions for changing fi lters.
• All approved respirators shall be selected, fi tted, used, and maintained in ac-
cordance with MSHA, OSHA, and other applicable regulations.
• Never substitute, modify, add, or omit parts. Use only exact replacement
parts in the confi guration as specifi ed by the manufacturer.
• Not for use as surgical masks.
This Clean Air Flow TM PAPR system is only part of an overall OSHA Respirator
Program, which contains the following documentation:
1. Administration
1. Use of Respirators
2. Selection of Respirators
3. Employee Training, Instructions, and Discipline
4. Inspection, Cleaning, Storage, and Repair
5. Emergency Use Respirators
6. Program Evaluation