ArcOne Clean Air Flow - Manual (Page 9)

#1
1.4 Helmet and Auto-Darkening Lens Approvals
The ArcOne helmet, consisting of the Vision and Viper series and the full family
of ArcOne’s Auto-Darkening Lenses have been tested and approved under one
or more of the following Standards Agencies (see specifi c models for standards
that apply):
• ANSI Z87.1 (USA)
• CSA Z94.3-02 (Canada)
• CE - EN 374/EN 175 (Europe)
Limitations (refer to the Auto-Darkening Welding fi lter manual enclosed)
2.0 System Use and Maintenance
2.1 Battery
The Lithium-ion battery included with your system does not need to be manually
discharged.
Charge/Recharge Battery:
1. Turn off the Blower if the Battery is connected to the Blower. (Note: the Bat-
tery does not need to be disconnected from the blower unit to recharge)
2. Connect the Charger to the Battery (fi g. 1)
3. The Yellow charge LED on the Charger will be lit if charging is necessary.
NOTE: this may take several seconds to indicate.
4. The Green LED on the Charger will be
displayed when battery charging is complete.
Figure 1