Axcess AxcessView User Guide User Manual
Page 17
AxcessView User’s Guide
© 2007, Axcess International, Inc..
750.008.005 R0003
17
Adding Asset Information
1:
Click Add. The
Add Asset
dialog box will appear (Figure 6).
Figure 6 Adding an asset
2:
Enter the tag ID number. (Refer to the
Personnel Information
section of this manual
for more information.)
The following information is optional: Description, Make, Model, and Serial Number.
3:
Select Normal or Beacon tag type from the Tag Type drop-down list.
NOTE
Refer to the
Tag Types
section of this manual for more information.
4:
Select the Generate Warning check box to send an alarm when the asset is detected
without its assigned owner, or without any owner.
5:
To display an image when a Tag is read, enter the path to the asset’s picture or click
Browse to locate the bitmap file.
NOTE
Images must be in either bitmap or JPEG file format only.
6:
Click OK. The new asset is listed in the table.
7:
Click Close to finish.
Assigning an Owner
By linking an asset to an employee, the proper owner or custodian of the asset is
established. This enables AxcessView to determine if an asset has been moved without
its proper custodian.
1:
Select the asset you want to assign in the top table.