Axcess AxcessView User Guide User Manual
Page 32
AxcessView User’s Guide
750.008.005 R0003
© 2007, Axcess International, Inc..
32
Figure 18 Locating Personnel
2:
Select the name of the person you want to locate. Information about the last Tag
event appears in the Last Known Location boxes.
3:
A Movement History report can be viewed on a specific person. Double-click or
select the person from the list and then click Movement History.
4:
The information that appears in the Personnel Movement History can be printed or
saved. Select either the printer or the folder icon located at the top of the window.
Locating Assets
By using the
Locate Asset
dialog box, you can view the last know location of an asset as
well as the device ID, date and time, and zone. Movement histories are generated from
this dialog box as well.
1:
From the Locate menu, select Locate Asset. The
Locate Asset
dialog box appears.
This dialog box is structured the same as the
Locate Personnel
dialog box (Figure
18).
2:
Select the asset you want to locate. Information about the last Tag event appears in
the Last Known Location
boxes.
3:
A Movement History report may be viewed on a specific Asset. Double-click or select
the Asset from the list and click Movement History.
4:
The information that appears in the Asset Movement History can be printed or saved.
Select either the printer or the folder icon located at the top of the window.
Locating Events
1:
From the Locate menu, select Locate
Events
.
The
Locate and View Events
dialog
box appears.
2:
Enter the dates for the event data you want to view in the Event List Criteria section.
3:
Select the type of data you want to view – Non-alarm events, alarm events or all
events.
4:
Click Refresh List. The table will display the data for the dates specified.