Axcess AxcessView User Guide User Manual
Page 19
AxcessView User’s Guide
© 2007, Axcess International, Inc..
750.008.005 R0003
19
5:
Click the Delete button at the top left of the Asset List screen.
6:
You will receive a message asking, “Do you really want to delete item?”
Click
Yes
to delete the asset information or click
No
to cancel.
7:
Click Close to finish.
Device Information
Before zones can be created, remote device information must be entered into the
AxcessView database.
From the Configure menu, select System Configuration. The
Device-Zone Setup
dialog
box will appear (Figure 8).
Figure 8 Entering device information
Adding Device Information
1:
On the
Device-Zone Setup
dialog box, click the Add button. The Insert/Update
section will become active.
2:
Type the device ID number.
(This is the Activator ID number.)
3:
Enter a descriptive name for the device’s location.
4:
Click Inside, Muster Site or Outside from the Tag Type drop-down list.
Inside – this read indicates that the person has logged into the building
Muster Site – this read indicates the tag is at this location.
Outside – this read indicates that the person is logged out to the building
5:
Click Update. The information will be displayed in the table.
6:
Continue to add devices or click OK to finish.