Axcess AxcessView User Guide User Manual
Page 21
AxcessView User’s Guide
© 2007, Axcess International, Inc..
750.008.005 R0003
21
2:
Type the zone ID (Receiver ID).
3:
Enter a description of the zone.
4:
Click the Update button. The information will appear in the table.
5:
Click OK
to finish.
Editing a Zone
Only the zone description may be changed.
1:
On the Zones tab of the
Device-Zone Setup
dialog box, select the zone to be edited
and click Edit.
2:
Change the zone description and click Update. The revised information will appear in
the table.
3:
Click OK to finish.
Deleting a Zone
1:
On the Zones tab of the
Device-Zone Setup
dialog box, select the zone and click
Delete.
2:
One of two messages will be displayed:
•
“Delete [Zone description]?”
•
“[Zone description] has Relationships. Drop Relationships?” This message will
be displayed if If the zone has been assigned a device
3:
Click
Yes
to delete entry or click
No
to cancel.
NOTE
If you select
No
, a message will display saying, “Delete not confirmed. Delete
canceled.” Click OK to cancel the deletion of the zone.
4:
Click OK to finish.
Figure 10 Assigning devices to zones.