Axcess AxcessView User Guide - Manual (Page 23)

AxcessView User’s Guide
© 2007, Axcess International, Inc.. 750.008.005 R0003 23
NOTE Old records will be automatically purged the next time the database is
opened.
Time Span Window Configuration
1: Select Time Span Window from the Configure menu. The Time Span Window dialog
box appears (Figure 12).
Figure 12 Time Span Window
2: The first box determines the time (in seconds) AxcessView waits for Tag information
from both an asset and personnel. Enter the time (in seconds) in the box.
If Tag readings are detected, further apart than the time given, AxcessView gives an
alarm. (See Assigning an Owner )
3: The second box sets the amount of time (in seconds) AxcessView waits before
reporting a Tag still in the field. Enter the time (in seconds) in the box.
4: Click Close.
Alarm Configuration
Each Receiver, when properly wired and configured, can trigger up to two TTL outputs
upon an alarm event.
1: From the Configure menu, select Alarm - Data Format. The Alarm-Data Format
dialog box will appear (Figure 13).