Barranca Diamond GP-6 Cabmaker - Manual (Page 21)

21
GP-6 CABMAKER MAINTENANCE
DIAMOND WHEEL/CARBIDE WHEEL REPLACEMENT
When worn-out, the diamond wheels and expandable drum can be removed and replaced. For all
models, first prepare the arbor shaft for removal from the body of the GP-6.
1. Remove the belt guard from motor mount (Fig 29).
2. Loosen the motor mount nuts, sliding the motor toward the polisher so that the belt can be
removed from the motor pulley (Fig 30).
3. Unscrew and remove the locking knobs from the hood (Fig 31).
4. Slide the motor away from the GP-6 Cabmaker and rotate the hood back (Fig 32) to expose the
shaft assembly.
Fig 29 - Remove belt guard from motor
mount
Fig 30 - Remove belt from motor pulley
Fig 31 - Remove the locking knobs Fig 32 - GP-6 Cabmaker (belts) with hood
rotated back