Barranca Diamond GP-6 Cabmaker - Manual (Page 9)

9
GP-6 CABMAKER SPECIFICATIONS
Part No: 8300048 (Belts), 8300052 (pads)
Weight: 95 lbs (115 lbs. crated)
Main Motor: Baldor Model 17K017W470
Horsepower: 1/3 HP
Motor Voltage/Frequency: 110 volt/60Hz
Amperage: 5.8 Amps
Motor RPM: 1,725 RPM Fixed
Motor Arbor Diameter: 5/8"
Duty: Continuous, automatic thermal protection shut off, manual restart switch
Motor Arbor Bearings: Ball Bearings, permanently sealed
Motor and Shaft Pulley: 2" OD x 5/8" bore (shaft) and 2" OD x 1/2" bore (motor)
Shaft Bearings: Permanently sealed 5/8" OD shaft ball bearings fit into aluminum tank
and upper hood housing
Wheel Arbor Flanges: 2" OD x 5/8" bore aluminum
Diamond Wheel Mesh Sizes: 80 and 200 mesh (170 mesh may be substituted)
Diamond Resin Belts: 400, 600, 1200, and 3000 mesh 6" x 1-1/2" wide belts
Expandable Rubber Drum: 6" x 1-1/2" wide x 5/8" arbor
Shaft Type: 5/8" precision machined stainless steel
Wheel and Blade Flanges: Aluminum 2" OD x 5/8" bore
Wheel Spacers: 7/8" OD x 5/8" ID aluminum (length varies for wheels and drum)
Convex Polishing End Hub: 6" aluminum hub disc with 5/8"-11" right hand thread
Water Pump: MK Submersible pump (part #155987), variable flow control with 1/4" ID
tubing.
Water Control Valves: 3 stainless steel control valves, brass lever cock valve with barb for 1/4"
ID tubing mounted on rear of the hood.
ON/OFF Switch Box: Lever operated switch box and pigtail female plug receptacle for sub-
mersible pump.
Included Accessories: 5" resin diamond pad set (50, 120, 220, 400, 800, 1,800, 3,500, 8,500 &
13,000 mesh)
5" rigid and 5" rubber backer pads
Three 6" Polytex pads
Three diamond paste syringes
8,000, 14,000, 50,000 mesh diamond paste
6" leather buffing pad
100 mesh green silicon carbide blade sharpening stick
3M On-Off cement
Submersible electric water pump
Water pump tubing
LockLine magnetic manifold and nozzle links/tips
GFCI Switch (110 volt units only)
GP-6 CABMAKER SPECIFICATIONS