Barranca Diamond GP-6 Cabmaker - Manual (Page 23)

23
Fig 33 - Outside face of diamond
wheel
Fig 34 - Inside face of diamond
wheel
Fig 35 - Bearing correctly installed Fig 36 - Bearing incorrectly installed
Fig 37 - Bearing collar correctly
installed
Fig 38 - Bearing collar incorrectly
installed
GP-6 CABMAKER MAINTENANCE
6. Install the sanding drum with arrow of rotation facing direction of rotation (Fig 42).
7. Make sure grinding wheel and drum bushings are installed.
8. Install drive belt, retension belt (Fig 43) and replace belt guard.