Bear Archery Compound Bow 2004 - Manual (Page 12)

BOW ADJUSTMENTS
Xact timing (continued)
6) Using the supplied box wrench, turn the timing
feature until the Reference Line on the eccentric
is even with the Xact Timing Gauge Indicator.
7) Lock the timing feature in place by tightening
caphead screw.
Tiller Adjustment (Used on Two cam bows)
Tiller is the difference in the distances from the string
to the points where the riser meets the limbs. It can be
measured using a bow square.
This measurement is not particularly critical regard-
less of shooting style, but should be maintained for con-
sistency.
The tiller should be even to 1/8” closer on the bot-
tom. Adjust the tiller by turning the limb bolts (see “Draw
Weight Adjustment”). To increase the tiller measurement
on one limb, turn the limb bolt counter-clockwise. To
decrease the tiller measurement, turn the bolt clockwise.
12