Bear Archery Compound Bow 2004 - Manual (Page 35)

STRING REPLACEMENT
Replacing the String — Fast-flight systems
1) Relax bow in a double pull bow press.
2) Remove string.
3) Attach the end loop of
the new string to the
cam or wheel.
4) Wrap string around
the bottom of the
eccentric, over the top
and back toward the
other end of the bow, keeping string above
the buss cables.
5) Bring the opposite end of the string around the
other eccentric and attach the end loop to the
post.
6) Make sure the string is firmly seated in the eccen-
tric grooves as you slowly release the bow press.
Replacing the string — Single cam systems
1) Relax the bow in a double pull bow press, and
remove the string, noting the post to which the
string was attached.
2) Attach an end loop to
the appropriate post in
the center of the cam
on the sight window
side. Wrap the string
around the bottom of
the cam, then around
over the top toward
the other end of the
bow.
3) Bring the string over
the top of the concentric idler wheel and back
toward the cam.
35