Bear Archery Compound Bow 2004 - Manual (Page 13)

BOW ADJUSTMENTS
Draw Length Adjustment - Modular Style
Most Escalade Sports bows, including the single cam
models, have modular cams or wheels. On these bows,
you can adjust your draw length to fit your shooting
style simply be changing the elements. This draw length
adjustment will have a negligible effect on your peak
weight. Some elements can be changed without using a
bow press.
The factory-installed elements will give you the draw
length marked on the bow. Elements are graduated in
one-inch increments.
1) Using a hex wrench, loosen the flathead socket
screws in the cam or wheel until the element falls
off. You may have to press the cables towards the
limb to reach the inner screw.
2) Slip the new element in place and loosely fasten
both screws. Then tighten both screws alternately,
making sure that the element is flush against the
face of the cam or wheel. Do not over tighten
screws.
13