BKI VGG-CO Rotisserie/Convection Oven Combination - Manual (Page 13)

Rotisserie/Convection Oven Operation
11
Screen Name Screen Description
Preheat Displays once the user touches the Preheat option from
the Preheat/Cook Selection screen. The Preheat cycle
heats the cooking cavity up to the pre-defined preheat
temperature. Once this temperature is reached the unit
automatically switches to the Ready To Cook mode. A
small highlighted letter H will appear to the right of the
temperature display to indicate that the controller has
energized the heating elements. The absence of the
letter H indicates that the controller has de-energized
the heating elements as the oven temperature has
reached the set temperature limit. The T button works
as described for the Preheat/Cook Selection screen.
Touching the X button for 3 seconds returns you to the
Recipe Selection screen.
Ready to Cook Displays once the user touches the Cook option from
the Preheat/Cook selection screen or once the preheat
cycle is finished or directly from the Recipe Selection
screen if no preheat temperature was programmed.
When the temperature is within 5° of the cook
temperature the controller will emit three 2 second
beeps indicating that the product can be loaded. The
user places the product to be cooked into the cooking
cavity and touches the COOK button to start the cooking
process. If the door is opened and/or the temperature
drops below 25° below the preheat temperature, the
screen will flash and beep every 30 seconds until the
COOK button is touched. The highlighted letter H works
as described for the Preheat screen. The T button works
as described for the Preheat/Cook Selection screen.
Touching the X button for 3 seconds returns you to the
Recipe Selection screen.
Cooking
RECIPE 02
EXTRA
Time
H
T
0:50
Displays once the COOK button is touched from the
Ready To Cook screen. This screen shows the cooking
temperature, the time remaining in the cook cycle, and
the elapsed time shown with the progress bar at the
bottom of the screen. Hold the X button for 2 seconds to
stop the cook in progress. The EXTRA button can be
used to add more cook time to the cycle. The cook cycle
ends when the cook time elapses. This is indicated by
three 2 second beeps. If a hold temperature was
programmed then the Hold screen is displayed. If no
hold temperature was programmed then the screen will
flash and beep until touched. The highlighted letter H
works as described for the Preheat screen. The T button
works as described for the Preheat/Cook Selection
screen. Touching the X button for 3 seconds returns you
to the Preheat/Cook Selection screen.