BKI VGG-CO Rotisserie/Convection Oven Combination - Manual (Page 24)

Rotisserie/Convection Oven Maintenance
22
6. Remove the Rotor System as described below:
a. Lift the washer from the groove and slide down the shaft.
b. Slide each rotor cup down the shaft.
c. Remove the inner shaft.
NOTE: The welded bead in the center of shaft denotes the shaft removal direction.
d. Remove rotors.
7. Place the Rotor System components in a large sink to soak in hot cleaning solution. Clean the
components with warm water, a sponge and BKI Cleaner. Wipe dry with a clean cloth.
8. Remove the Fan Guard, Circulation Bottom and Fan Blades as described below:
a. Unfasten (counterclockwise) each 1/4 turn latch on the Fan Guard and remove from oven.