chiliGREEN D620S U - Manual (Page 99)

Advanced Controls
3 - 16 TV Display
3
TV Display
To display desktop images on a TV display, connect the TV to your
LCD PC by using an S-Video cable from the TV to the port at the
rear of the computer. Follow the instructions in “Switching/En-
abling Displays (Driver Controls)” on page 3 - 12. The TV system
format may be switched between PAL and NTSC in the BIOS (see
“TV System (Advanced Menu>Advanced Chipset Control)” on
page 5 - 12). You can also adjust the TV Scan Line Mode from the
BIOS.
5
CRT and TV Display
setting
If you intend to use a
TV and CRT as your
display devices, the TV
must be set as the pri-
mary Display_1, and
the CRT as the sec-
ondary
Display_2
(see Figure 3 - 8).
Figure 3 - 8
CRT and TV
Display