Billion Electric Company BiGuard 2 - Manual (Page 102)

102
Connection Name: A user-defined name for the connection.
Tunnel: Select Enable to activate this tunnel. Select Disable to deactivate this
tunnel.
Username: Please input the username for this account.
Password: Please input the password for this account.
Retype Password: Please repeat the same password as previous field.
Connection Type: Select Remote Access for single user, Select LAN to LAN for
remote gateway.
Peer Network IP: Please input the IP for remote network.
Peer Netmask: Please input the Netmask for remote network.
Netbios Broadcast: Allows BiGuard to send local Netbios Broadcast packet through
the PPTP Tunnel, please select Enable or Disable.
4.4.6 QoS
BiGuard 2/10 can optimize your bandwidth by assigning priority to both inbound
and outbound data with QoS. This menu allows you to configure QoS for both
inbound and outbound traffic.