Billion Electric Company BiGuard 2 - Manual (Page 70)

70
4.4.2.1 WAN
Connection Method: Select how your router will connect to the Internet. Selections
include Obtain an IP Address Automatically, Static IP Settings, PPPoE
Settings, PPTP Settings, and Big Pond Settings. For each WAN port, the factory
default is DHCP. If your ISP does not use DHCP, select the correct connection
method and configure the connection accordingly. Configurable items will vary
depending on the connection method selected.
4.4.2.1.1 DHCP
Host Name: Some ISPs authenticate logins using this field.
MAC Address: If your ISP requires you to input a WAN Ethernet MAC, check the
checkbox and enter your MAC address in the blanks below.
Candidates: You can also select the MAC address from the list in the Candidates.
DNS: If your ISP requires you to manually setup DNS settings, check the checkbox
and enter your primary and secondary DNS.