Billion Electric Company BiGuard 2 - Manual (Page 47)

47
3. From the drop-down box, select your Ethernet adapter.
The window is updated to show your settings. Using the default BiGuard 2/10
settings, your PC should have:
- An IP address between 192.168.1.1 and 192.168.1.253
- A subnet mask of 255.255.255.0
- A default gateway of 192.168.1.254
3.5 Factory Default Settings
Before configuring your BiGuard 2/10, you need to know the following default
settings:
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings: