Billion Electric Company BiGuard 2 - Manual (Page 75)

75
Click Apply to save your changes. To reset to defaults, click Reset.
A simpler alternative is to select Quick Start from the main menu. Please see the
Quick Start section of this chapter for more information.
4.4.2.2 Bandwidth Settings
Under Bandwidth Settings, you can easily configure both inbound and outbound
bandwidth.
WAN: Enter your ISP inbound and outbound bandwidth for WAN.
NOTE: These values entered here are referenced by QoS.
4.4.2.3 WAN IP Alias
WAN IP Alias allows you to input additional WAN IP addresses. WAN IP Alias can be
used for Multiple NAT settings, including LAN Address Mapping settings and Virtual
Server settings.