COATS 1100 Series Balancer - Manual (Page 13)

Important: Always read and follow instructions. • 9
Key Group If you press/select ... Then indicator illuminates/displays...
5 5
Balance Mode Keys
Match
that Match Balance (Optimization)
mode is activated.
Spoke (1150-2D only)
that Behind Spoke mode is activated
Toggle to activate / select location 1 or
location 2 for adhesive weights.
Calibration
that Machine Calibration mode is
activated.
+
Function+Calibration that Arm Calibration mode is activated.
Dynamic or Static
the Balance mode that is activated.
Scroll to select Dynamic (default),
Dynamic/Total Static or Static.
6 6
Balance Option Keys
A or B
the Operator Memory option that is
activated. Toggle between two operator
memories A (default) or B.
Ounce or Gram
the weight measurement option that is
activated. Toggle to select either Ounce
(default) or Gram.
Car or Light Truck
the weight increment option that
is activated. Toggle to select either
0.25-ounce passenger car (default) or
0.50-ounce RV-Lt Truck (heavy wheels).
Round Off
the weight increment option
0.25-ounce (default) is activated. Toggle
off to select 0.01-ounce (fine).
7 7
Navigation Keys
or
Down Arrow or Up Arrow
the data entry values. Scroll to select
desired value.
Function
the activated function. Usually used in
combination with another key.
EXIT that the function or error is deactivated.
START / STOP
that measurement cycle is either
begun (hood lowered) or is halted.