COATS 1100 Series Balancer - Manual (Page 7)

Important: Always read and follow instructions. • 3
Specifi cations
Wheel Diameter Range
8 - 30 inches (203 - 762 mm)
Wheel Width Range
2 - 20 inches (51 - 508 mm)
Maximum Outside Tire Diameter
Up to 44 inches (1016 mm)
Maximum Tire/Wheel Weight
150 pounds (68 Kg)
Mounting Shaft Diameter
40 mm
Resolution (Round Off Mode)
0.25 ounce, position 1.40 degrees
Resolution (Non-Round Off Mode)
0.01 ounce, position 1.40 degrees
Balancing Display Increments
0.25 or 0.01 ounces
Electrical Requirements
220V, 1 PH, 60 Hz, 20A
NEMA L6-20R
220V, 3 PH, 60 Hz, 20A
NEMA L15-20R
(use grounding type plug)
Footprint
Depth: 60 inches (1524 mm)
Width: 60 inches (1524 mm)
Shipping Weight
680 pounds (308 Kg)
(with accessories)
Features
• Automatic Data Entry for Offset and Diameter - Man-
ual Entry Backup on all Parameters (1150-2D only)
• Static-on-Screen™
• Direct Select™ Weight Placement Location
Dynamic (Standard): Clip-on Weights
Alloy: User Defined
Static
• Behind the Spoke Weight Placement (1150-2D only)
• Automatic Start When Hood is Lowered
• Single Spin Balancing - Dynamic and Static
• Easy-To-Read Position Indicators
• Hood Safety Interlock System
• Extended Mounting Faceplate for Deeper Wheels
• Removable Center Shaft for Closed Center Wheels
• Match Balance (Optimization)
• Operator Memory for Two Different Users
• User Friendly Weight and Position Calibration
• No Bolt-down Installation
• Solid State Motor Control
Accessory Options
Basic Accessory Kit 85009974
• Small Cone
• Medium Cone
• Large Cone
• Light Truck Cone
• Rim Width Calipers
• Wheel Weight Pliers
• Hubnut Handle
• Small Pressure Cup & Rubber Lip
• Cone Spring
• Scraper
• Cone Peg Brackets