DATOptic uNAS – tNAS - Manual (Page 23)

uNAS/tNAS User Guide Version 1.0 Page 23
5.2.1.2 Administrator
Function: Administrator access
Use this function to restrict access to the server administration.
Set port - You can change https port (default 443)
IP address -
You can assign IP addresses (separated by a semicolon) that are granted to
access the Server Web administration. This field left blank means no restriction.
Lock console without password - Disables access to the console (and LCD keys)
Lock console with password - To get access to the console (and LCD keys) you need to
type password. Note that this password should be exactly 8 characters long and include
only 1-4 digits.
Unlock console - Unrestricted access to the console.
Please exercise caution with this function if all computers in the network receive IP
addresses via DHCP: current IP can be replaced by a new one after the lease ends.
Please pay attention using Lock console feature - you will not be able to reset default
administrator access from the console in case of any mistake setting IP address. To
restore default settings you have to re-update software in the uNAS/tNAS module or
contact technical support.
Function: Administrator password
Using this function, you can change the passwords of the server administration accounts.