DATOptic uNAS – tNAS - Manual (Page 65)

uNAS/tNAS User Guide Version 1.0 Page 65
This function disconnects all users connected to the shares on specified protocol, which may
lead to data loss if any files are open.
5.2.3.3 Snapshot
Function: Snapshot tasks
This function enables you to manually activate (start) or deactivate (stop) snapshots. Activation
of a snapshot is only possible for unscheduled snapshots (with inactive schedule setting).
When logical volume is set as a destination replication mode and data are inconsistent then
there might be problems while reading data from disks on iSCSI initiator.
Function: Snapshot info
Here you view see information for selected snapshot.
Name
Name of snapshot.
LV
Logical volume for which snapshot is assigned.
Status
Status of snapshot. Can be one of following:
Active
Snapshot is in active state.
Inactive
Snapshot is inactive, probable reason: overflow.
Unused
Snapshot is currently unused.