DATOptic uNAS – tNAS - Manual (Page 7)

uNAS/tNAS User Guide Version 1.0 Page 7
If that is the case, you can proceed at 4.3. If your network does not have a DHCP server, uNAS/tNAS will
start with the default settings: IP address 192.168.0.220 and subnet mask 255.255.255.0.
You can change these values again by typing in the following key combination: left CTRL, left ALT and N.
You can select a different IP address now. All other available functions on of the console will appear after
pressing F1 key (see below).
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
After a connection has been established, all settings can also be changed remotely via the web browser. If
your network requires it, the address of the standard gateway and the broadcast address can be changed.
For additional information, please read the chapter “Functions of the console display.”