Despatch LBB2-xxA/B-2 - Manual (Page 59)

LBB Series Oven Owner’s Manual
Version 18
8.2. Optional Equipment
8.2.1. Assemble Oven Stand
1. Install four rubber grommets into holes in the stand (Figure 26).
a. For LBB1-69 stands, the rear grommets mount into the forward set of rear holes.
b. On LBB2-12 stands the rear grommets mount into the set of holes closest to the rear
of the stand.
2. Place the oven on top of the stand. The four embossed areas in the bottom of the oven should
center in the grommets.
3. Using the self-drilling screw and large flat washer provided, install through each embossed
area as shown below.
Figure 26. Optional LBB Oven Stand.